Support for Orico HM2-G2.

README.md

@@ -102,6 +102,7 @@ You can check in the [configure](configure) folder or use values from the [dump]
 | Orico          | PWDM2-G2(A) | RTL9210B     | [config](configure/RTL9210B_CG_ORICO_PWDM2-G2.cfg)   | [dump](dump/ORICO_PWDM2-G2.txt)      |       |
 | Orico          | AM2C3-G2    | RTL9210B     | [config](configure/RTL9210B_CG.cfg)                  | [dump](dump/ORICO_NVME_AM2C3-G2.txt) |       |
 | Orico          | TCM2M-C3    | RTL9210B     | [config](configure/Orico_TCM2M-C3.cfg)               | [dump](dump/Orico_TCM2M-C3.txt)      |       |
+| Orico          | HM2-G2      | RTL9210B     | [config](configure/ORICO_HM2_G2.cfg)                 | [dump](dump/ORICO_HM2-G2.txt)        | Tested with firmware [1.34.39](firmware/realtek_rtl9210B_fw1.34.39\(station-drivers.com\).zip). Select latest FW from selection since its not default one |
 | Unionsime      | MD202       | RTL9210B     | [config](configure/RTL9210B_CG_UNIONSINE_MD202.cfg)  | [dump](dump/UNIONSINE_MD202.txt)     |       |
 | UniAccessories | ?           | RTL9210B     | [config](configure/RTL9210B_CG_UniAccessories.cfg)   | [dump](dump/UniAccessories.txt)      |       |
 | Fideco | M210           | RTL9210C(N)     | [default config](configure/Fideco-M210-RTL9210-default.cfg) [low power boot drive config](configure/Fideco-M210-RTL9210-HighCompatibilityforBoot.cfg)   |       |       |

configure/ORICO_HM2_G2.cfg

@@ -0,0 +1,19 @@
+VID = 0xbda
+PID = 0x9210
+MANUFACTURE = "Realtek"
+SCSI_VENDOR = "Realtek"
+PRODUCT = "RTL9210"
+SCSI_PRODUCT = "RTL9210 NVME"
+SERIAL = "012345678905"
+DISK_HOTPLUG = 0x0
+LED = 0x1
+PINMUX1 = 0x0
+PINMUX2 = 0x0
+U2_MAXPWR = 0xfa
+U3_MAXPWR = 0x70
+ASPMDIS = 0x0
+DISK_IPS_THRES = 0xa
+CUSTOMIZED_LED = 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 
+DIS_SHOW_EMPTY_DISK = 0x1
+UART_DBG_PIN = 0x5
+RM_INTERNAL_RD = 0x0

dump/ORICO_HM2-G2.txt

@@ -0,0 +1,65 @@
+**************************************************************
+Device : [Port21] : Realtek RTL9210 NVME #0
+**************************************************************
+U2PHY : 02 f4 9b e0 e1 
+U3PHY : 02 d4 09 00 d5 00 80 
+VID : 0x0bda
+PID : 0x9210
+MANUFACTURE : "Realtek"
+PRODUCT : "RTL9210"
+SERIAL : "012345678904"
+SCSI_PRODUCT : "RTL9210 NVME    "
+SCSI_VENDOR : "Realtek "
+USB_SELF_PWR : n/a
+DISK_HOTPLUG : 0x00
+LED : 0x01
+PINMUX1 : 0x00000000
+PINMUX2 : 0x00000000
+U2_MAXPWR : 0xfa
+U3_MAXPWR : 0x70
+ASPMDIS : 0x00
+PCIE_REFCLK : n/a
+DISK_IPS_THRES : 0x0a
+SWR_1_2V : n/a
+EN_UPS : n/a
+PD : n/a
+CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 
+SUSPEND_LED_OFF : n/a
+FORCE_USB_SPEED : n/a
+FORCE_PCIE_SPEED : n/a
+EN_U1U2 : n/a
+FORCE_USB_QUIRK : n/a
+FORCE_PCIE_QUIRK : n/a
+FAN : n/a
+DIS_SHOW_EMPTY_DISK : 0x01
+FORCE_SATA_NORMAL_DMA : n/a
+UART_DBG_PIN : 0x05
+FINGER_PRINT_EN : n/a
+RM_INTERNAL_RD : 0x00
+HS_AUTO_SWITCH : n/a
+UART_BAUD_RATE : n/a
+CUSTOMIZED_DISK_IDENTIFY : n/a
+HW_LED_CFG : n/a
+CDROM_CFG : n/a
+SUPPORT_HID : n/a
+LATE_INIT_DISK : n/a
+SCSI_WP_PIN : n/a
+SD_MMC_TYPE : n/a
+FORCE_PORT_TYPE : n/a
+BCDDEVICE : n/a
+SUSPEND_DISK_OFF : n/a
+SCSI_WB_PIN : n/a
+CUSTOMIZED_FEATURE : n/a
+PERIPH_API : n/a
+RAID_CFG : n/a
+
+Boot Mode : Flash
+FW Ver : 1.24.2
+FW Build Date : 2020.12.07
+IC Pkg Type : PCIE
+UUID : n/a
+
+Disconn_ForceUSB2 : false
+
+
+