Conversation
Update translation_TR.json
…lation Fix typo in SK translation for `ProfilePhase5Duration`
* Starting GUI render refactor to be more immediate mode Update TemperatureAdjust.cpp . Cleanup Soldering Sleep SolderingProfiles Soldering Rework Rough pass GUI Temp Adjust Cleanup old OperatingMode Debug Menu * Update TemperatureAdjust.cpp * Roughing some transition work * Fixup! Hook in the init starter helper * Better home screen button handler * FIXUP! Fix typo's . * Update SettingsMenu.cpp * More settings rework * More settings rendering * Fixup * Transitions Update SolderingProfile.cpp Hook in transistions * Update TemperatureAdjust.cpp * Update push.yml * Add auto-repeat to settings menu * Miniware: Use IT for I2C writes * Update USBPDDebug_HUSB238.cpp * Force write screen on side animation cancel . * Refactor moving down the settings list * Update settingsGUI.cpp * Update I2C_Wrapper.cpp * Update OLED.cpp * Rework button handling * Fix PD debug at boot * Fixup not showing right menu options * silence some warnings * Style cleanup * Fkit use bit-bang I2C for Miniware * Update GUIRendering.md * Fixup transition on enter soldering mode * Save Settings * Fixes for some animations not running Dont bail on animations if keypress is still held * Fixup settings acceleration * OLED Up animation * Link up/down on debug meny * Make all accelerometers I2C bus aware Update accelerometers_common.h * Make I2C mag optional * Miniware -> Only Bit-Bang I2C * Fixup for scrollbar FIXUP! Debug menu returns to home screen FIXUP! Up oled animation Fix temp exit * Settings menu -> Both buttons return a menu layer * Merge fixup * Update BMA223.cpp * Re-Enable OLED sleep * Save Setting on temp adjust exit * WiP on startup mode * Some autostart working * Add hibernation mode & more autostart fixes * If cant CJC; go to startup * Hibernate in sleep * Cleanup scroll indicator * FIXUP! Ensure startup warnings are linked in * FIXUP! Ensure we render out temp change before timing out * Ensure 100ms delay between CJC samples * Fix not re-calculating menu length on entering menu * Implement NegotiationinProgress for USB-PD * Mask heating until PD finishes negotiation * Fixup staying in hibernate correctly * Warning timeout * Show reset settings warning * Correctly compensate help text start time * Update GUIThread.cpp * Update USBPD.cpp * . * Fixup sleep time * Update printSleepCountdown.cpp * replacing countdown with big plus while in boost mode * bringing back the + 1 since it was missing when not in boost mode * Bail on USB-PD check after 3 seconds incase of DC source * Fix hibernate * Update PIDThread.cpp * did center plus symbol (boost mode) * Big refactor to not make settings increment handler handle the "is last item" return * Fixup boot logo * Fix flashing * Fixup recalculate the menu length on long hold * Fixup missing menu entries * Fix junk left on screen after user confirmation * Re-order button handler to use custom, then default order to allow setting associated setting * Attach setting for settings using custom handler * Fix swap +/- keys * Fix boost temp * Implement last menu option for Language selector * Wait for init before CJC runs * Check last setting via increment value * Update BSP.cpp * removed = from >= Otherwise incrementing would stop and the scroll bar would already flash at the second to last value. * (Hacky) Fix for Settings reset --------- Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Basic Init * Add S60P to CI
* Basic Init * Rought implementation of fs2711 usb pd interface * Rought implementation of fs2711 usb pd interface * Still needs work overcurrent protection keeps getting tripped * New pdo selection logic * Update push.yml * Update push.yml * Update push.yml * Update Makefile * Adds PPS * Removed unused define * Adds PPS * Apply suggestions from code review Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com> * Code review changes * Added osDelay include * New line alignment for S60 softwarei2c * Code review * Fixes code review stuff * code review changes * Change voltage limit to 20 as that's what the device is rated for * Shortened wait time for usb pd * Fixed issues that cuase S60P to restart constantly * fixing minimal OLED brightness With the current settings, the OLED turns off if the first level is selected. * Adds protocol to s60p debug menu * loosened fs2711 protocol selection timing * Adds PDO register reading to negotiation logic * Fixes FS2711 timeout issue and cleans up driver * Adds FS2711 protocol negotiation to power loop * Removed uneeded define * Reverts changes to Font.h and adds clang-format comments --------- Co-authored-by: Ben V. Brown <Ralim@Ralimtek.com> Co-authored-by: discip <53649486+discip@users.noreply.github.com> Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
#1895) Signed-off-by: yuxiaojun <yuxiaojun@uniontech.com>
New string translations, shortened some existing ones that didn't fit on Pinecil V2 screen.
* Add 4 ohm PTS200 tip for PinecilV2 * Add PTS200 4 ohm tip to TS101 * Update BSP.cpp
* Update porting guide + cleanups * Documentation/README.md: update autogenerated file
This reverts commit 7376c49.
Completed PT translation file
Set "Zzz " as universal var instead of `SleepingSimpleString` "translatable" string
…tion of installation guide Added a message about how to get around windows dialog prompt when copying from NTFS filesystems (Most of what Windows users will be copying from) to FAT which the iron uses. This is an extremely common problem for Windows users, and I'd like to put in a tested workaround in the guide as it would have saved me about 15 minutes on what would have been a 20 second install. I believe this will be of similar benefit to most Windows users.
Add description of fix for around common error under Windows section...
…ning (#1893) * Remove register keyword according to ISO C++17 for fixing related warning from compiler
Handle non EPR devices not encoding PPS correctly By not trusting them at all.
Makefile: add diff output for python linter if there are some warnings
Add option to swap A/B buttons in Settings menu with minimal changes (fix for #2034)
img2logo.py has IntelHex as a dependency which is not installed by default with Python3 or Pillow and so should be specified explicitly in the instructions.
* Updated translation_DE.json * Updated translation_DE.json
* Update translation_IT.json * Update translation_IT.json
* Create USB-PD Debug docs * Add to menu * Update DebuggingPD.md
* Adding CI check to prevent settings docs drift * Fixup gen_menu_docs * Generate new settings docs
* Added automatic retries * Generalized naming
* Update usb-pd * Ensure NO_DYNAMIC always works * Update usb-pd * Update usb-pd
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Bumps [actions/download-artifact](https://github.com/actions/download-artifact) from 4 to 5. - [Release notes](https://github.com/actions/download-artifact/releases) - [Commits](actions/download-artifact@v4...v5) --- updated-dependencies: - dependency-name: actions/download-artifact dependency-version: '5' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [actions/checkout](https://github.com/actions/checkout) from 4 to 5. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](actions/checkout@v4...v5) --- updated-dependencies: - dependency-name: actions/checkout dependency-version: '5' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
![github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=60&v=4){kind=small}
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
What is the new behavior (if this is a feature change)?
Other information: