Somehow, I can't see the .srt data

[calmarc]

Is there an existing issue for this?

• I have searched the existing open and closed issues

Software version

latest on linux dev (b2aecde)

What operating system are you using?

gnu/linux

What GPU are you using?

No response

What problem did you encounter?

I have no srt data, not in the preview nor on the video. But I guess, theoretically it should burn them into the video, not only the osd?

Link to screenshots

http://www.calmar.ws/tmp/251-Wed-screen.png http://www.calmar.ws/tmp/252-Wed-screen.png

Link to video, OSD and font files

No response

Log output

[Pairan]

... same here on apple silicon !

[Pairan]

I guess I found the cause:

The SRT files seem to have changed the format since January 2025 or somewhere at that time.

The old files looked like:
00:00:00,000 --> 00:00:00,150 Signal:4 CH:1 FlightTime:1 SBat:16.1V GBat:11.2V Delay:31ms Bitrate:25.0Mbps Distance:0m

Yet the new ones have this format:
00:00:00,000 --> 00:00:00,150 CH:1 MCS:3 SP[ 53 144 60 148] GP[ 53 76 62 91] GTP:29 GTP0:00 STP:26 STP0:00 GSNR:15.4 SSNR:12.0 Gtemp:45 Stemp:62 Delay:47ms Frame:50 Gerr:0 SErr:0 10, [iso:100,mode=val, exp:0] [gain:1.02 exp:0.111ms, Lx:0] [cct:5773, rb:1.646 1.876]

As we can see the main information "we" would assume for is no longer present in the file. Looks like the SRT currently holds Gyro data more than the old stuff we used.

Update / SOLVED:

What we see in the SRT files is DEBUG data!

To solve that check your goggles...
Go to the menu Settings > Display > Debug:

Mine was set to neither DEBUG: ON or DEBUG: OFF ...

If that's the case then set DEBUG: OFF in the menu while connected to the VTX. After that the normal SRT data will be written in the goggles!

Kudos for the support to @avsaase ... you solved it ;)